Equipment and Instruments
Every Test Requires the Right Equipment... And Every Result Follows a Clear Technical Process
Instead of displaying scattered images of individual equipment, we've organized our instruments into clear testing systems that reflect the actual workflow—from sample preparation and test execution to data analysis and the issuance of the final technical report.
EQUIPMENT ARCHIVE كل أجهزة القسم
4 UNITSSOIL TESTING EQUIPMENT منظومة Soil Testing Equipment
Understand Soil Properties Before the Project Is Built Upon It
Specialized equipment for analyzing particle size distribution, moisture content, compaction characteristics, and bearing capacity, supporting roadworks, earthworks, foundation layers, and construction projects.
CBR Testing Machine Measures the bearing capacity of soil and base layers.
Standard Sieve Set Analyzes particle-size distribution and classifies the sample.
Proctor Mold and Rammer Used for standard and modified Proctor tests and determining the moisture-density relationship.
Laboratory Drying Oven Dries samples and determines moisture content.
EQUIPMENT ARCHIVE كل أجهزة القسم
2 UNITSCONCRETE TESTING EQUIPMENT منظومة Concrete Testing Equipment
From Fresh Concrete To Strength Testing After Hardening
A complete testing system covering workability assessment during placement, specimen preparation, and compressive strength testing of concrete cubes, cylinders, and core samples.
Concrete Compression Testing Machine Measures the compressive strength of cubes, cylinders, and core samples.
Test Cubes and Cylinders Prepares representative samples for monitoring concrete strength.
Slump Cone — Slump Test Measures the workability of fresh concrete on site.
Cube and Cylinder Moulds Casts and prepares samples according to the testing procedure.
EQUIPMENT ARCHIVE كل أجهزة القسم
6 UNITSASPHALT TESTING EQUIPMENT منظومة Concrete Testing Equipment
Analyze the Asphalt Mix Before Approval for Use in Pavement Layers
Specialized equipment for determining bitumen content, preparing test specimens, measuring stability and flow, and simulating compaction to support asphalt mix design and pavement quality control.
Asphalt Extraction Machine Determines the bitumen content and separates the components of the asphalt mixture.
Marshall Testing Machine Measures stability and flow and evaluates the performance of asphalt mixtures.
Superpave Gyratory Compactor Simulates mixture compaction and evaluates its behavior under operating conditions.
Marshall Compactor and Moulds Prepares uniform asphalt samples before conducting Marshall tests.
EQUIPMENT ARCHIVE كل أجهزة القسم
1 UNITSSTEEL TESTING EQUIPMENT منظومة Steel Testing Equipment
Verify Steel Strength Before It Bears the Project Loads
Specialized equipment for testing the mechanical properties of steel specimens, including tensile strength, yield strength, and elongation, to verify that reinforcing steel and structural steel products comply with approved technical standards.
Tensile Testing Machine Applies an increasing axial load to the steel sample until it reaches the breaking point.
Yield Strength Measurement Determines the stress at which permanent deformation begins in the sample.
Ultimate Tensile Strength Measures the maximum stress the steel sample can withstand before failure or fracture.
Elongation Measurement Evaluates the ductility of the steel and the percentage of elongation after the sample fractures.
SAMPLE تجهيز العينة
TEST تنفيذ الاختبار
DATA قراءة البيانات
REVIEW مراجعة النتائج
REPORT التقرير الفني